Tacchi (Italy) 40 x 120 Model FT 45/500 X 3000 CNC Deep hole Drilling/Boring/Trepanning Lathe S/N 6996. Siemens 840DE CNC Controls. New 2003. Installed 2004/2005. NOTE: (2) Machines of same model # are for sale. 1St new in 2011, 2nd is new in 2003.

Specifications:
Swing Over Bed: 39.375"
Max. Boring Depth: 118
Boring Capacity: 0.8" - 7.9"
Trepanning: 2" - 11"
Counterboring: 15.75"
Saddle Feed: 157 IPM
Siemens SINUMERIK 840 DE CNC Control
Travelling Tailstock
(2) 3 jaw thru hole manual chucks
(2) Steady rests
(1) Pressure head
Chip conveyor system
BORING BARS INCLUDED
BAR 3.4-3.906
BAR 4.400-4.875
BAR 3.937-4.400
ALL Available manuals
This machine has pull boring capability with proper chuck and tooling
Complete Coolant System
Under power in Texas.
NOTE: THE ORIGINAL PRICE OF THIS MACHINE WHEN ACQUIRED NEW WAS IN EXCESS OF $1,000,000.00 USD (One Million USD) AS EQUIPPED.

RANGE OF APPLICATION:
The Deep hole boring machine Mod. FT 45 - 500X3000 CNC has been designed and built for use conforming
to the following field of application:
Center height 500 mm
Swing over bed 1000 mm
Min/Max. boring depth 700/3000 mm
Main headstock motor power 100 HP
Workpiece rotation speed 8-1300 rpm
Workpiece rotation speed at constant power 80-1300 rpm
Boring headstock motor power 100 HP
Tool rotation speed 8-1300 rpm
Tool rotation speed at constant power 80-1300 rpm
Solid boring capacity 20-200 mm
Trepanning capacity 50-400 mm

E3. MANUFACTURERS SPECIFICATIONS:
Center height mm 500
Travel on bed mm 1000
Min/Max boring depth mm 700/3000
MAIN HEADSTOCK
Spindle speed range rpm 8-1300
Speed range with constant power rpm 80-1300
Number of speed n. 3
Spindle motor driving power kW 100
Max spindle torque Nm 9000
Spindle nose DIN 55027 GR. 11
Spindle hole mm 105
BORING HEADSTOCK
Spindle speed range rpm 8-1300
Speed range with constant power rpm 80-1300
Number of speed n. 3
Spindle motor driving power kW 100
Max spindle torque Nm 9000
Spindle nose DIN 55027 GR. 11
Spindle hole mm 105
BORING SADDLE
Rapid traverse in the two direction mm/min 4000
Feed rate range, infinitely variable mm/min 0-4000
Max boring thrust N 50000
OIL PRESSURE HEAD SADDLE
Rapid traverse in the two direction mm/min 4000
Feed rate range, infinitely variable mm/min 0-4000
Oil pressure head thrust against the workpiece N 50000

C1. MACHINE CONFIGURATION
The Deep hole boring machine Mod. FT 45 - 500X3000 CNC is composed of:
N 1 BED;
N 1 MAIN HEADSTOCK;
N 1 BORING HEADSTOCK;
N 1 BORING SADDLE;
N 1 OIL PRESSURE HEAD SADDLE;
N 1 BORING BAR SUPPORT (capacity 262 mm);
N 1 VIBRATION DAMPER (capacity 14-68 mm);
N 1 VIBRATION DAMPER (capacity 43-118 mm);
N 1 OIL PRESSURE HEAD;
N 1 BORING BAR DRIVERS (capacity 18-118);
N 1 BORING BAR DRIVERS (capacity 130-238);
N 1 CHUCK 600 mm;
N 1 MANUALLY SELF-CENTERING CHUCK 500 mm;
N 1 SELF-CENTERING CHUCK FOR OIL PRESSURE HEAD 430 mm;
N 1 NUMERICAL CONTROL SINUMERIK 840 D;
N 1 COOLANT SYSTEM;
N 1 SELF-CLEANING FILTER;
N 1 CHIP CONVEYOR.