Filters
Angle Plates (1)
Chucks (11)
Grinders, Ball (1)
Lathes, Boring (1)
Lathes, CNC (11)
Lathes, Engine (5)
More…
Sort By
(2) Used 20" ATS SYSTEMS BT SERIES 3-JAW EXTENDED STROKE FRONT ACTUATED AIR CHUCKS Model BT-7-3-ES, with 7.3" hole.
ChucksStock #: 1098
Used - Excellent
(2) Used 20" ATS SYSTEMS BT SERIES 3-JAW EXTENDED STROKE FRONT ACTUATED AIR CHUCKS Model BT-7-3-ES, with 7.3" hole.
20in
Chuck Size
3
Jaws
--
Mount
D-F 8,000mm (315”) Model CK5280 CNC Double Column Vertical Turning Lathe
Lathes, VTL (Vertical Turret Lathe)Stock #: 1094
New - In-Stock
D-F 8,000mm (315”) Model CK5280 CNC Double Column Vertical Turning Lathe
240in
Table Dia
315in
Swing
160in
Work Ht-U/R
--
Power
8" x 80" Conventional Facing and Centering Machine Model XZ8220D/1000
Facing & Centering MachinesStock #: 1093
New - In-Stock
Conventional Facing & Centering machine Changzhou model XZ8220D/1000: 8" x 80"
8" x 40" Conventional Facing and Centering Machine Model XZ8220D/1000
Facing & Centering MachinesStock #: 1092
New - In-Stock
Conventional Facing & Centering machine Changzhou model XZ8220D/1000: 8" x 40"
D-F 4m x 4m (157.5” x 157.5”) CNC Rotary Table, 100 Ton Capacity, Model RT4040-100 with 2m (78.75”) V axis Travel.
Hyundai Kia 31.5" x 19.7" Model KV45 CNC Vertical Machining Center. Fanuc 0i CNC Controls. New 2008
Machining Centers, VerticalStock #: 1089
Hyundai Kia 31.5" x 19.7" Model KV45 CNC Vertical Machining Center. Fanuc 0i CNC Controls. New 2008
31.5in
X
19.7in
Y
19.7in
Z
15hp
Power
IKEGAI 60” x 532” Model ANC-75 Double End CNC Oil Country Lathe With 29” Hole Thru the Spindle. Fanuc 0T CNC Controls. New 1992
Lathes, Oil Field & Hollow SpindleStock #: 1088
IKEGAI 60” x 532” Model ANC-75 Double End CNC Oil Country Lathe With 29” Hole Thru the Spindle. Fanuc 0T CNC Controls. New 1992
IKEGAI 60” x 532” Model ANC-75 Double End CNC Oil Country Lathe With 29” Hole Thru the Spindle. Fanuc 0T CNC Controls. New 1992
Lathes, CNCStock #: 1087
IKEGAI 60” x 532” Model ANC-75 Double End CNC Oil Country Lathe With 29” Hole Thru the Spindle. Fanuc 0T CNC Controls. New 1992
1500mm
Swing
8000mm
Machining Length
--
# Axis
--
Chuck Size
NEW D-F 160mm Model TK6916(14x5) CNC Floor Type Horizontal Boring Mill. 14m Cross x 5m Vertical
Boring Mills, Horizontal, Floor TypeStock #: 1086
NEW 160mm D-F CNC Floor Type, Ram Type Horizontal Boring & Milling Machine Model TK6916(14x5). 14M Cross x 5m Vertical
160mm
Spindle Size
14000mm
X-Horiz Tvl of Col
5000mm
Y-Vert Tvl of Head
--
Power
Okuma LB35II CNC Turning Center x 60” Center Distance. OSP700L Controls
Lathes, CNCStock #: 1085
Used - Good
Okuma LB35II CNC Turning Center x 60” Center Distance. OSP700L Controls. Under power in Shop in Texas.
28.4in
Swing
60in
Machining Length
--
# Axis
12in
Chuck Size
Summit 4" Table Type Horizontal Boring Mill. Newall DRO
Boring Mills, Horizontal, Table TypeStock #: 1084
Summit 4" Table Type Horizontal Boring Mill. Newall DRO
4in
Spindle Size
68in
X-Horiz Tvl of Table
--
Y-Vert Tvl of Head
--
Power
GIDDINGS & LEWIS 5” Model 350RT Table Type Horizontal Boring Mill with Rotary Table & Facing Head
Boring Mills, Horizontal, Table TypeStock #: 1083
Used - Good
GIDDINGS & LEWIS 5” Model 350RT Table Type Horizontal Boring Mill with Rotary Table & Facing Head
5in
Spindle Size
65in
X-Horiz Tvl of Table
72in
Y-Vert Tvl of Head
--
Power
Durma 1.58" x 10.170' 4-Roll Model HRB-4-3040 CNC Plate Bending Machine. New 2012
Rolls, Plate Bending (incl Pinch)Stock #: 1082
Used - Excellent
DURMA 1.58" x 10.170' 4-Roll Hydraulic Plate Rolling Machine With CNC Control With Rectilinear Guides, Mdl. HRB-4-3040, Hydraulic Drop End, Safety Line All Around Machine for Emergency Stop, Pedest...
122in
Length of Rolls
--
(Init/Dbl Pinch or Pyramid)
1.58in
Max Thickness
--
Max Thickness (by gauge)
Betts 168" double column, double ram vertical turning lathe, floor model, no pit required
Lathes, VTL (Vertical Turret Lathe)Stock #: 1081
Used - Good
BETTS 168” (4.2m) HEAVY DUTY VERTICAL BORING AND TURNING LATHE. NEW 1944
12ft
Table Dia
168in
Swing
96in
Work Ht-U/R
--
Power
3m H x 2.2m W x 1.5m D (10' H x 7.2' W x 5' D) Cast Iron drilled & tapped angle plates.
D-F 3.1m (122”) Model CK5231V CNC Double Column Vertical Turning Lathe. 2.0m Workpiece Height. 16 Ton Workpiece Weight Capacity.
D-F Horizontal Lathe Models CF61220H/5000 (86-5/8” swing over bed-ways – 72.85” over cross slide). Max. work-piece load: 18 ton
Lathes, EngineStock #: 1078
New - In-Stock
D-F Horizontal Lathe Models CF61220H/5000 (86-5/8” swing over bed-ways – 72.85” over cross slide). Bed-ways width 1,100mm (43-5/16”). Max. work-piece load: 18 tons. Load capacity of CF61220H is 18 ...
86.625in
Swing
200in
Centers
--
Spindle Bore
--
Power
MG 3,000mm x 140mm (10' x 5.5") 3-Roll Hydraulic Initial Pinch Plate Bending Roll, Model 3R3000x140
Rolls, Plate Bending (incl Pinch)Stock #: 1074
New - In-Stock
MG 3,000mm x 140mm (10' x 5.5") 3-Roll Hydraulic Initial Pinch Plate Bending Roll, Model 3R3000x140
140" Bullard Dyn-Au-Tape CNC Vertical Boring Mill with Fanuc 15-T CNC Controls
Lathes, VTL (Vertical Turret Lathe)Stock #: 1072
Bullard Dyn-Au-Tape 140" swing CNC Vertical Boring Mill with Fanuc 15-T CNC Controls
124in
Table Dia
140in
Swing
65in
Work Ht-U/R
125hp
Power
90" King Double Column, 3-Heads Vertical Turret Lathe Model 84, High Column, Vertical Turning Lathe
Lathes, VTL (Vertical Turret Lathe)Stock #: 1069
Used - Excellent
90" King Double Column, 3-Heads Vertical Turret Lathe Model 84, High Column, Vertical Turning Lathe. Floor mounti8ng machine, no pit required.
84in
Table Dia
90.5in
Swing
72.5in
Work Ht-U/R
75hp
Power
Mori Seiki Model SL-65MC Turn/Mill Center with 6.5" hole thru the spindle, live tooling
Lathes, CNCStock #: 1068
Used - Excellent
Mori Seiki Model SL-65MC Turn/Mill Center with 6.5" hole thru the spindle, live tooling
35in
Swing
35in
Machining Length
3
# Axis
24in
Chuck Size
D-F 130mm (5-1/8”) Conventional DRO Table Type Horizontal Boring and Milling Machine - Model TPX6113
Boring Mills, Horizontal, Table TypeStock #: 1091
New - In-Stock
D-F 130mm (5-1/8”) Conventional DRO Table Type Horizontal Boring and Milling Machine - Model TPX6113
5.125in
Spindle Size
80in
X-Horiz Tvl of Table
70in
Y-Vert Tvl of Head
37hp
Power
4" x 20" Conventional Facing and Centering Machine Model XZ8210D/500
Facing & Centering MachinesStock #: 1066
New - In-Stock
Conventional end facing & centering machine Changzhou model XZ8210D/500: 4" x 20"
8" x 20" Conventional Facing and Centering Machine Model XZ8220D/500
Facing & Centering MachinesStock #: 1065
New - In-Stock
Conventional Facing & Centering machine Changzhou model XZ8220D/500: 8" x 20"
Okuma LVT-300 CNC Turning Center with OSP-U100L CNC Controls
12.6in
Swing
7.87in
Machining Length
--
# Axis
8in
Chuck Size
4" Giddings & Lewis Fraser table type model T-4 horizontal boring mill
Boring Mills, Horizontal, Table TypeStock #: 1062
Used - Good
4" Giddings & Lewis Fraser table type model T-4 horizontal Boring Mill
4in
Spindle Size
75in
X-Horiz Tvl of Table
60in
Y-Vert Tvl of Head
25hp
Power
8" x 20" Conventional Facing and Centering Machine Model XZ8220D/500
Horizontal DrillsStock #: 1061
New - In-Stock
Conventional Facing & Centering machine Changzhou model XZ8220D/500: 8" x 20"
4" x 20" Conventional Facing and Centering Machine Model XZ8210D/500
Horizontal DrillsStock #: 1060
New - In-Stock
Conventional end facing & centering machine Changzhou model XZ8210D/500: 4" x 20"
Mori Seiki NH4000 DCG CNC Horizontal Machining Center with 15.7" dual pallets and changer. New 2004
22in
X
22in
Y
24in
Z
25hp
Power
Used 5' x 12' x 10" T-Slotted Cast Iron Floor Plates. (2) available.