D-F 130mm (5-1/8”) Conventional DRO Table Type Horizontal Boring and Milling Machine - Model TPX6113

D-F 130mm (5-1/8”) Conventional DRO Table Type Horizontal Boring and Milling Machine - Model TPX6113
Technical Information
Features:
★ X, Y, Z, B axis has the DRO system.
★Worktable servo indexing in 0.001 degree by B axis DRO
★ X, Y, Z, W axis with servo motor and ballscrew
★ BT50 spindle nose with hydraulic clamp tool
★ Spindle motor use CTB servo motor with Danfoss/ABB drive
★ Z axis with additional support guideways, bed body casting in one piece
★ High rigidity spindle could insure the strong machining.
★ Siemens/Schneider electric units in electric cabinet-Option

1, Introduce
The horizontal boring and milling machine series TPX series of our company is the finish machining equipment in the universal machine. It is suitable for such operation as drilling, counter-boring, boring, reaming, spot-facing, and milling etc. Also the horizontal boring and milling machine type is equipped with fixed facing head on which radial facing slide can be radically feed consequently to enable the machine to undertake boring of large-diameter hole, external cutting ,end face turning and recessing, etc.
The machine is composed of bed, front column, headstock, cross and longitudinal saddle, worktable, and balance weight pulley etc. Their motions are the headstock moves vertically along the column's guideway, the worktable can move transversely and longitudinally on the bed, and the worktable can rotate.
2. The characteristics of TPX series:
1）The speed change of main motion and feed motion of the machine are all adopted hydraulic pre-selection centralized control which operation is simple and convenient. The indicator lamps are lighted up to give the signal during the course of speed and feed changing.
2）The vertical coordinate(headstock lifting direction)and cross coordinate(worktable transverse movement)and longitudinal coordinate(worktable longitudinal movement, supplied according to the custom's requirement)are provided with new type Digital Unit with memory function, which makes the machine with complete function and high accuracy.
3 Main parts of the machine such as bed, front column and guideways of longitudinal saddle are all adopted electric-contract surface heating self-cooling harden, which bring high stiffness of the guideways and extend the using life of the machine.
4) The horizontal guideway surface of the machine is provided with all pull-board type dust-proof.
3. Transmission systems of the machine
X axis: Servo motor with ballscrew
Y axis: Servo motor with ballscrew
Z axis: Servo motor with ballscrew
W axis: Servo motor with ballscrew
B axis: Servo motor with gearbox for indexing
4. Electrical system
A reliable & optimized electrical system is adopted on the machine. All the electrical components, except the travel limit switches, high / low range feed switches, braking switch of the tool head, locate in the electric cabinet. All other operations, like movement, lubrication, lightening, etc locate on the operation panel for easier operation.
○ Big electric cabinet for easier operation and maintenance.
○ OMRON/SIEMENS brand PLC unit is equipped for reliable electrical control.
○ Neat wiring and enclosed cabinet to keep away of intrusion of dusts, humidity, etc.
5. Hydraulic system of the machine
The hydraulic system of this kind of machine is composed of two parts: One is in the tail bracket and upper and inner part of headstock which is used for spindle speed change and feed speed change and headstock internal lubrication. Another is in the inner part of longitudinal saddle of the machine, which is used for the transverse of headstock, longitudinal & cross movement and rotation of worktable Hydraulic system of main transmission、feed speed change and internal lubrication of headstock.
6. Digital readout-DRO-SINO
Our standard machine is with 4 axis DRO
X axis: with DRO
Y axis: with DRO
Z axis: with DRO
B axis: with DRO
W axis: with DRO-Option
7, Main Specifications
Specifications Unit TPX6113F1 TPX6113F2
Spindle diameter mm 130
Spindle Taper BT50/ISO50
Spindle tool clamping Hydraulic by button
Max. Spindle Torque N. m 3100
Max. axis resistance of Spindle N 31000
Speed range of spindle rpm 1000
Spindle speed range steps 2
Power of Spindle motor-Servo motor KW 30
Max.torque of facing head N.m 4900
Facing head diameter mm 630
Speed range of facing head rpm 2.5-125
Table size(L × W) mm 1600×1400 1800x1600
Max. load of table ton 8
T-slot size mm 28
X-axis travel mm 1800 2000
Y-axis travel mm 1600 1800
Z-axis travel mm 1500 1500
W-axis travel mm 800 800
U-axis travel(Slide of facing head travel) mm 200 200
Worktable indexing in each 90 degree 　 90°x 4
Min. distance between spindle axis and table surface mm 0
Rapid travel(X/Y/Z) mm/min 2500
8. Components on machine
Item Brands
PLC control Omron-Japan/Siemens-Germany
Electric units in cabinet Tianshui 213-CE standard
DRO for X, Y, Z axis Sino
DRO for B axis indexing Sino
Servo motor for X, Y, Z, W axis Huada/CTB
Servo motor for worktable indexing-B axis Huada/CTB
Drive for Servo motor of X, Y, Z, W, B Maxsine
Servo motor for spindle CTB
Drive for spindle motor Danfoss/ABB
X axis Ballscrew LTM/TBI
Y axis Ballscrew LTM/TBI
Z axis Ballscrew LTM/TBI
W axis Ballscrew LTM/TBI
Bearing for ballscrew INA/NSK
Spindle bearing FAG/SKF
Main hydraulic units Kompass-Taiwan
Air condition for electric cabinet-Option Tongfei/Labor